STATUS mode command prompt will be App:Status>:
ABOUT or VERSION - Display the Application Servers version information.
ADD <Name> - Creates a new Application Server with the name specified,
             and switches to Server Mode.
APPS - <Name or Line Number> - Switch to specified server, to configure
                               these settings.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLIENTS - <Name or Line Number> - Switch to specified server, to configure
                                  these settings.
DEL or DELETE <Name or Line Number> - Deletes the Application
                                      Server specified.
HELP - Display valid commands available in current configuration mode.
LIST - List all currently configured Application Servers and their running
       state, prefixed by a line number.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - <Name or Line Number> - Switch to specified server, to configure
                                  these settings.
QUIT or Q - Exit the configuration.
REFRESH <Rate> - The rate in seconds to redisplay server activity
                 (5->60 Seconds).
SERVER - <Name or Line Number> - Switch to specified server, to configure
                                 these settings.
SESSIONS - <Name or Line Number> - Switch to specified server, to configure
                                   these settings.
START <Name or Line Number> - Starts the specified Application Server.
STOP <Name or Line Number> - Stops the specified Application Server.
USERS - <Name or Line Number> - Switch to specified server, to configure
                                these settings.
LOCKOUT mode command prompt will be App:Lockout>:
AUTO ON | OFF - To set the Auto Lockout while Idle, if no ON | OFF given
                setting is toggled.
CANCEL or BACK - Discards changes and exists to Mode you entered in on.
LIST - Shows this modes properties and their current state.
OKAY - Saves changes and exits to Status Mode.
PASSWORD or PASSWORD <Password> - To set configuration password.
TIME or TIME <Mins> - To set the time until lockout.
SESSIONS mode command prompt will be App:ServerName:Sessions>:
APPS - Switch to Apps configuration mode settings.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLIENTS - Switch to Clients configuration mode settings.
COLUMNS - Switch to sub mode columns.
DETAILS <line number> - To display detailed information about session
                        specified.
HELP - Display valid commands available in current configuration mode.
INTERRUPT <line number> - To interrupt session specified.
LIST or LIST ALL - List all sessions for this Application Server,
                   prefixed by a line number.
LIST CONNECTED - List only connected sessions for this Application Server,
                 prefixed by a line number.
LIST TERMINATED - List only terminated sessions for this Application Server,
                  prefixed by a line number.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
QUIT or Q - Exit the configuration.
REFRESH <Rate> - The rate in seconds to redisplay sessions activity
                (5-60 Seconds).
SERVER - Switch to Server configuration mode settings.
TERMINATE <line number> - To terminate session specified.
USERS - Switch to Users configuration mode settings.
COLUMNS mode command prompt will be App:ServerName:Sessions:Columns>:
ADD <line number or Column Name> - To add a specific column to the sessions
                                   view.
CANCEL or BACK - Discards changes and exists to Sessions Mode.
DEL or DELETE <line number or Column Name> - To remove a specific column from
                                             the sessions view.
EDIT POS or EDIT POSITION <line number or Column Name> - To edit a specific
                          columns current view position.
EDIT WIDTH - <line number or Column Name> - To edit a specific columns display
                                            width.
HELP - Display valid commands available in current configuration mode.
LIST or LIST ALL - List all columns that can be customized for the session
                   view, prefixed by a line number.
LIST AVAILABLE or LIST AVA - List only columns not part of the session view,
                             prefixed by a line number.
LIST USED - List only the columns that are used in your current session view,
            prefixed by a line number.
LOCK - Lock the configuration based on the Lockout settings.
OKAY - Saves changes and exits to Sessions Mode.
SERVER mode command prompt will be App:ServerName:Server>:
APPLY - Saves changes and remains in current mode.
APPS - Switch to Apps configuration mode settings.
CANCEL or BACK - Discards changes and exists to Status Mode.
CERT or CERTIFICATE <Path> - SSL certificate file to use for SSL-encrypted
                             communications.
CLIENTS - Switch to Clients configuration mode settings.
DEFAULT USER ON | OFF - To set Run All as Default User, if no ON | OFF given
                        setting is toggled.
DEFAULT UMASK <Reason> - Umask to use when running programs which are not
                         configured as applications.
DEL or DELETE - Deletes this Application Server.
DETACH SPAWNS ON | OFF - Spawns from within this session will use nohup,
                         if no ON | OFF given setting is toggled.
DISABLE ALL ON | OFF - Prevents all new sessions from being started, if no
                       ON | OFF given setting is toggled.
DISABLE NEW ON | OFF - To stop new sessions from being started, if no ON | OFF
                       given setting is toggled.
DISABLE SERVER ON | OFF - To set whether or not this server can be started,
                          if no ON | OFF given setting is toggled.
ENCRYPT ON | OFF - Use SSL Encryption on the socket, if no ON | OFF given
                   setting is toggled.
HELP - Display valid commands available in current configuration mode.
KEEPALIVES ON | OFF - To set TCP/IP KeepAlives on the socket, if no ON | OFF
                      given setting is toggled.
LIST - Shows the properties and their current state for the Server Mode.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
QUIT or Q - Exit the configuration.
REASON <Reason> - Describe why the server is being disabled.
SERVER INI <ini File> - Provides the name of the INI file to use for the
                        *appserv/server daemon.
SESSIONS - Switch to Sessions configuration mode settings.
SHOW TASKBAR ON | OFF - Shows client sessions in Windows task, if no ON | OFF
                        given setting is toggled.
SOCKET or SOCKET <Number> - TCP/IP port number or Socket number that the
                            server will listen for requests on.
START - Starts this Application Server.
START DIR <Directory> - Specifies the directory where the *appserv/server
                        daemon is to be started in.
STOP - Stops this Application Server.
USER COMMAND ON | OFF - Set Use CmdAsUser utility as specific users, if no
                        ON | OFF given setting is toggled.
USER DOMAIN <Domain> - Domain name for the user ID given in the User Name.
USER NAME <Name> - Provides the user name for the server-side ProvideX
                   sessions.
USER PASSWORD <Password> - Logon password for the user ID given in the
                           User Name.
USERS - Switch to Users configuration mode settings.
CLIENTS mode command prompt will be App:ServerName:Clients>:
ADMIN REQUESTS <Number> - Seconds for internal administration requests
                         (0 - 99999).
APPLY - Saves changes and remains in current mode.
APPS - Switch to Apps configuration mode settings.
CANCEL or BACK - Discards changes and exists to Status Mode.
CONSOLE ON | OFF - Allow anonymous login to access console mode, if no
                   ON | OFF given setting is toggled.
HELP - Display valid commands available in current configuration mode.
LIST - Shows the properties and their current state for the Server Mode.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
LOGIN ON | OFF - Anonymous sessions are allowed, if no ON | OFF given setting
                 is toggled.
MAX CLIENTS <Number> - Number of "unique" clients (0 - 99999).
MAX SESSIONS <Number> - Number of sessions to allow (0 - 99999).
NEW CONNECTIONS <Number> - Seconds for first valid request (0 - 99999).
QUIT or Q - Exit the configuration.
RE-CONNECT NONE | PROMPTED | AUTOMATIC | HIDDEN - Client workstations
                   to Re-Connect options.
RE-CONNECT TIMEOUT <Number> - Seconds to maintain server side if client
                              disconnects(0 - 99999).
SERVER - Switch to Server configuration mode settings.
SESSIONS - Switch to Sessions configuration mode settings.
USER REQUESTS <Number> - Seconds for any additional requests (0 - 99999).
USERS - Switch to Users configuration mode settings.
APPS mode command prompt will be App:ServerName:Apps>:
ADD <Application Name> - Creates a new application for this server and
                         switches to Detail Application mode.
APPLY - Saves changes and remains in current mode.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLIENTS - Switch to Clients configuration mode settings.
DEL or DELETE <Line Number or Application Name> - Will delete this app.
DENY <Line Number or Application Name> - Provides on/off control to this
                                         application.
DETAILS <Line Number or Application Name> - Switch to detail information about
                                            this application.
HELP - Display valid commands available in current configuration mode.
LIST - List local applications for this server, prefixed by a line number.
LIST ALL - List global and local applications for this server, prefixed by
           a line number.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
QUIT or Q - Exit the configuration.
SERVER - Switch to Server configuration mode settings.
SESSIONS - Switch to Sessions configuration mode settings.
USERS - Switch to Users configuration mode settings.
Specific App mode command prompt will be App:ServerName:Apps:AppName>:
ARGUMENTS <Arguments> - Command Line Arguments for the server-side process.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLIENT TYPE ANY or ALL | WINDX |JAVX - Set which type of client software may
                                       access this application.
CLIENTS ARGUMENTS ON | OFF - Allows clients to send Added Command Line args,
                             if no ON | OFF given setting is toggled.
CMD OPTIONS <Command> - Extra Command Line Options.
DEFAULT UMASK <Number> - Umask for this application.
DETACH SPAWNS ON | OFF - Whether to use nohup for any spawns, if no ON | OFF
                         given setting is toggled.
DISABLE APPLICATION ON | OFF - Disables use of the application, if no ON | OFF
                               given setting is toggled.
EXTRA CMD ON | OFF - Allows client to send Extra Command Line Options,
                     if no ON | OFF given setting is toggled.
HELP - Display valid commands available in current configuration mode.
INIT WINDOW NORM or NORMAL | MIN or MINIMIZED | MAX or MAXIMIZED | HIDDEN
      State of the initial ProvideX base window on the Client Workstation.
JAVX VER <Number> - Min JavX version to run.
LEAD PROGRAM <Name> - Actual name of the ProvideX program to be run.
LIST - Shows the properties and their current state for the Server Mode.
LOCK - Lock the configuration based on the Lockout settings.
MAX JAVX <Number> - Max JavX version to run.
MAX WINDX <Number> - Max WindX version to run.
OKAY - Saves changes and exits to Apps Mode.
PROVIDEX EXE <Path> - Location on the server of the ProvideX executable to run
                      this application.
SERVER INI <ini File> - INI file to use for the server-side ProvideX process.
SET FID ON | OFF - Sets the FID(0) for the server-side process to match the
                   FID(0) value used, if no ON | OFF given setting is toggled.
SET START-IN ON | OFF - Allows client to set different Start-In dir, if no
                        ON | OFF given setting is toggled.
START DIR <Directory> - Directory where to launch the process that runs this
                        lead program.
WINDX VER <Number> - Min WindX version to run.
USERS mode command prompt will be App:ServerName:Users>:
ADD <Users Name> - Creates a new user for this server and switches to Detail
                   user mode.
APPLY - Saves changes and remains in current mode.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLIENTS - Switch to Clients configuration mode settings.
DEL or DELETE <Line Number or User Name> - Will delete this user.
DENY <Line Number or Users Name> - Provides on/off control to this user.
DETAILS <Line Number or User Name> - Switch to detail information about this
                                     user.
HELP - Display valid commands available in current configuration mode.
LIST - List local applications for this server, prefixed by a line number.
LIST ALL - List global and local applications for this server, prefixed by
           a line number.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
QUIT or Q - Exit the configuration.
SERVER - Switch to Server configuration mode settings.
SESSIONS - Switch to Sessions configuration mode settings.
USERS - Switch to Users configuration mode settings.
Specific User mode command prompt will be App:ServerName:Users:UsersName>:
CANCEL or BACK - Discards changes and exists to Status Mode.
CHANGE PASSWORD ON | OFF - Allows user to change their password, if no
                           ON | OFF given setting is toggled.
DENY ACCESS ON | OFF - Denies user from logging in, if no ON | OFF given
                      setting is toggled.
DOMAIN <Domain> - Windows Domain Name required for the User account given
                  in the Server.
ENABLE CONSOLE ON | OFF - Allowed access to ProvideX console prompt,
                          if no ON | OFF given setting is toggled.
FULL NAME <Name> - Descriptive name for the remote user.
HELP - Display valid commands available in current configuration mode.
LIST - Shows the properties and their current state for the User Mode.
LOCK - Lock the configuration based on the Lockout settings.
NEXT LOGON ON | OFF - User must change password next time they log into
                      the app, if no ON | OFF given setting is toggled.
OKAY - Saves changes and exits to User Mode.
PASSWORD <Password> - Password the user must enter while logging into the
                      application server.
REMOTE NAME <Name> - User ID on the server for running these processes.
REMOTE PASSWORD <Password> - Password required for the User ID account given
                             in the Server User Name.
REMOTE USER ON | OFF - Allow Remote User Name and Password along with the
                       Default Users, if ON | OFF given setting is toggled.
RUN ANY | CONFIGURED - Determines what the user may run.
LOGGING mode command prompt will be App:ServerName:Logging>:
APPLY - Saves changes and remains in current mode.
CANCEL or BACK - Discards changes and exists to Status Mode.
CLEAR <Line Number> - Will clear this log file in server is not running.
CLIENTS - Switch to Clients configuration mode settings.
ENABLE <Line Number> - Provides on/off control to this log.
HELP - Display valid commands available in current configuration mode.
LIST - List event logs and current status, prefixed by a line number.
LOCK - Lock the configuration based on the Lockout settings.
LOCKOUT - Switch to Lockout configuration mode settings.
LOGGING - Switch to Logging configuration mode settings.
PRINT <Line Number> - Will print this log file to a selected printer.
QUIT or Q - Exit the configuration.
SERVER - Switch to Server configuration mode settings.
SESSIONS - Switch to Sessions configuration mode settings.
USERS - Switch to Users configuration mode settings.
VIEW <Line Number> - Will display this log file to screen in server is
                     not running.
